No 2 (2018): Metrology and instruments

No 2 (2018)

Published April 26, 2018
Metrology and instruments

ISSN 2307-2180

Full Issue
FULL ISSUE PDF

COMPARISON STANDARDS

Yu. Kuzmenko, O. Samoylenko
3-13
Processing by Least Square Method of the Measurements Results for Key, Regional and Supplementary Comparison of the Measurement Standards
DOI: https://doi.org/10.33955/2307-2180(2)2018.3-13
Abstract views: 188 | PDF Downloads: 213
ARTICLE PDF

MEASUREMENT AND TESTS

О. Kriukov, I. Lysak
14-17
Accounting of the temperature effect when measuring the instantaneous values of the gunpowder gases pressure in the bores of firearms
DOI: https://doi.org/10.33955/2307-2180(2)2018.14-17
Abstract views: 168 | PDF Downloads: 134
ARTICLE PDF

INTERNATIONAL COMPARAISONS

V. Gavrylkin, S. Kulyk, L. Vlasova
18-24
Measurement of Wheat Moisture by Using Vacuum-Thermal Unit ВТУ-36
DOI: https://doi.org/10.33955/2307-2180(2)2018.18-24
Abstract views: 174 | PDF Downloads: 612
ARTICLE PDF

INTERLABORATORY COMPARISON

O. Velychko, V. Dovgan, D. Nikitenko, Ia. Brezytskyi
25-30
Interlaboratory Comparisons of Calibration Results of the Measures of Electrical Resistance of Direct Current
DOI: https://doi.org/10.33955/2307-2180(2)2018.25-30
Abstract views: 169 | PDF Downloads: 149
ARTICLE PDF

GAS ANALYSIS

V. Kozubovskyy, I. Aljakshev
31-35
Gas analysis devices for controlling the ventilation system in the house
DOI: https://doi.org/10.33955/2307-2180(2)2018.31-35
Abstract views: 157 | PDF Downloads: 250
ARTICLE PDF

METHODS AND PROCEDURES

Y. Volodarskiy, L. Aksionova
36-39
Application of the Statistical Approach to Evaluating the Performance of Processes for Their Constant Improvement
DOI: https://doi.org/10.33955/2307-2180(2)2018.36-39
Abstract views: 157 | PDF Downloads: 154
ARTICLE PDF

MODELS AND MODELING

G. Kononenko, L. Nazarenko
40-46
About the Forming Light City Environment
DOI: https://doi.org/10.33955/2307-2180(2)2018.40-46
Abstract views: 146 | PDF Downloads: 261
ARTICLE PDF

QUALITY AND EFFICIENCY

L. Kosheva, M. Klevtsova
47-53
Generalized Approach to the Estimation of Statistical Controllability of the Technological Process. Part 2. Statistical Toolkit for Assessing Controllability of Technological Process
Abstract views: 108 | PDF Downloads: 72
ARTICLE PDF

NANOMETROLOGY

V. Kovalchuk, S. Perestoronin, A. Tsurkan
54-59
Mechanical Properties of Nanoclusters of Silicon: Geometrical Aspect
Abstract views: 102 | PDF Downloads: 115
ARTICLE PDF

MILITARY METROLOGY

V. Kononov, V. Boyko, O. Nozhenko, Yu. Rondin, O. Merkulov
60-65
The Substantiation of the Development of Methodological Aspects of Military-Metrological Support for the Development (Upgrading) of Weapons and Military Equipment Samples
Abstract views: 99 | PDF Downloads: 150
ARTICLE PDF

TERMS AND DEFINITIONS

Yu. Kuzmenko, O. Velychko, M. Rozhnov, O. Samoylenko
66-67
As for the development of a national normative document on metrological terminology
Abstract views: 118 | PDF Downloads: 163
ARTICLE PDF