Measuring System for Non-Destructive Testing of Metal Rods
Abstract views: 41
PDF Downloads: 22

ARTICLE PDF

Keywords

nondestructive testing, eddy current sensors, flaw detector scheme, errors.

How to Cite

Ornatsky, D. P., Krivokulska, O. O., Burbela, O. O., & Bliznyuk, O. D. (2020). Measuring System for Non-Destructive Testing of Metal Rods. Metrology and Instruments, (2), 22-24. https://doi.org/10.33955/2307-2180(2)2020.22-24

Abstract

The control parameters of metal products using the eddy current method of nondestructive testing based on electromagnetic induction law is now widespread. Due to the high sensitivity over a wide frequency range of the ability to control the mechanical properties , uniformity of material, both magnetic and non-magnetic materials, beskonechnosti, high reliability, automation, process control, etc.

The object of study is the process of interaction of external electromagnetic fields with defects in heterogeneity of structure in metal rod, causing a deformation of microtubuli currents and, accordingly, their influence on the inductance coil of the sensor. So, according to the law of electromagnetic induction eddy currents induced by an external electromagnetic field will be asking a private field that will oppose the external field that will lead to a change in inductance of the sensor coil. Therefore, the most informative parameter in this case is the relative change in inductance of the sensor.

In the known designs use differential transformer sensors, transmission type, which differ in complexity of implementation, but have high sensitivity. In existing works not enough attention on improving of the metrological characteristics . Modern means of microstraava flaw detectors in the overwhelming number are for scientific research, but little attention is paid to tools that can be used in industrial processes, through a complex measurement process in the existing funds and the large volume of the software during automatic processing of information.

In the presented work there is a system for nondestructive testing of metal bars with deprivation of the above-mentioned disadvantages, which would provide high metrological characteristics in a wide frequency range, separate measurement of impedance components of the sensor, which allows the reduction of methodological errors of determination of the main characteristics of the output signal of microstraava sensors.

The scientific result is created sambalanco pavement system based on electronic dharamtala model of a vortex sensor with high metrological characteristics, which allows you to create real-time signal proportional to the amount of damage that will give you the opportunity to increase productivity in the quality control bar of metal products in a production environment.

https://doi.org/10.33955/2307-2180(2)2020.22-24
ARTICLE PDF
Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.